December 21, 2014, 01:50:24 AM
Pages: [1]

HVLP turbine spray gun

Why should you use High-Volume Low-Pressure (HVLP) spray guns?

Paint spray contains harmful chemicals such as isocyanates, solvents, and paint additives. Painting with an HVLP spray gun significantly reduces overspray and as a result:

(1) Releases of toxic chemicals into the air go down, helping protect you, your co-workers, and your shop’s neighborhood.

(2) The amount of paint you need is reduced, saving $1,000's on paint costs every year.

Can you achieve a high quality finish using HVLP spray guns?

Yes! Painters at many auto shops use only HVLP spray guns when refinishing cars, without sacrificing the quality of the finish, even for top coats. Of course, you’ll need to make some technical adjustments to your pressure settings and spray cap when converting from a conventional spray gun to an HVLP spray gun. But once you do, you’ll find that HVLP spray guns are relatively easy to use, reduce overspray, and produce a high quality finish.


Advantages of turbine systems - constant supply of warm, dry air. No need for oil, water separators. Portable. Can be plugged into any 115 volt outlet.
Disadvantages - larger diameter air hose bothers some people. Smaller selection of equipment manufacturers.

HVLP, turbine spray gun, conversion hvlp, high volume low pressure, spray painting, automotive woodworking, polyurethane, epoxy, stains.HVLP, turbine spray gun, conversion hvlp, high volume low pressure, spray painting, automotive woodworking, polyurethane, epoxy, stains.HVLP, turbine spray gun, conversion hvlp, high volume low pressure, spray painting, automotive woodworking, polyurethane, epoxy, stains.HVLP, turbine spray gun, conversion hvlp, high volume low pressure, spray painting, automotive woodworking, polyurethane, epoxy, stains.

Share on Twitter! Digg this story! Del.icio.us Share on Facebook! Technorati Reddit StumbleUpon


1uidhvlphoseThis is a very flexible, light weight HVLP whip hose with 3/4" GHT nylon fittings.
Will fit and work with most turbines by Accuspray, Capspray / Spraytech / Titan, Fuji, Lex-Aire, Lemmer, etc. 6' in length x standard 3/4" i.d. hose.

This hose is meant to be attached to the gun end of your regular hose and not directly to turbine unit. Add this hose between your regular hose and the quick disconnect at the gun. The light weight and increased flexibility makes extended spray sessions easier and much less tiring.

Shipped to
Share on Twitter! Digg this story! Del.icio.us Share on Facebook! Technorati Reddit StumbleUpon
Pages: [1]